| Hardware Specifications | Description |
| Ports Type | 16×1000Mbps PoE ports (RJ45)+2×1000Mbps ports(RJ45)+2×1000Mbps ports（SFP） |
| Standards | IEEE802.3, IEEE802.3u, IEEE802.3az, IEEE802.3x, IEEE802.3af, IEEE802.3at |
| Switching Capacity | 40Gbps |
| MAC | 8K |
| Packet Buffer | 4M Bit |
| Forwarding Performance | 29.76Mpps |
| Power Supply | AC: 100-240 V, 50/60 Hz |
| POE | Supported POE |
| MAX. POE Power | Max capacity: 185W, Max capacity for single port: 30W |
| Cooling Fans | 1 |
| Weight | <4.2 kg |
| Indicator | PWR (Green), LNK/ACT (Green), PoE (Orange) |
| Storage Temperature | -40 °C ~ 70 °C |
| Operating Temperature | 0 °C ~ 40 °C (32 °F ~ 104 °F) |
| Operating humidity | 10%～90% (noncondensing) |
| Storage humidity | 5%～90% (noncondensing) |
| Dimensions (W×D×H) | 280mm x 180mm x 44mm (11″×7.1″×1.7″) |
| Working Mode | Default(Normal mode) : All ports can communicate with each other., VLAN(Secure mode): Downlink ports can communicate only with uplink ports., Extend(Surveillance mode): Transmission distance up to 250 meters. Downlink ports can communicate only with uplink ports. |
UNV – NSW2010-18GT2GP-POE – Ethernet Switch(POE)S
MODEL-NSW2010-18GT2GP-POE-IN
Ethernet Switch(POE)
• Support IEEE802.3 at standard, compatible with IEEE802.3 af by electrical equipment (PD)
• Supports PoE Power up to 30W for each PoE port;
• Auto detect power device; will not burned non-standard PoE device or normal PoE switch;
• Supports port power supply prioritization, guarantee the continuous power supply of key nodes;
• Supports IEEE802.3 x full duplex flow control and Backpressure half duplex flow control;
• Line-speed forwarding, intelligent identification
Reviews
There are no reviews yet.